Description

Fender Japan [Zinger Series] Telecaster released in 1984
Zinger series was the most reasonable line at that time.
According to the catalog specs, the body is ash, but this one has a stamp of Japanese Squier CTL-50, which was manufactured until the previous year, on the neck pocket and neck joint, so it seems to have been manufactured by appropriating it, hence Sen is the body material.

There are scratches, dents, dull parts, rust, and other signs of use.
The bridge has been replaced with a 6-saddle type. Rear pickup and condenser seem to have been replaced, but the model number is unknown. The control knobs have been replaced with black metal knobs.
The neck is in good playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: E805223
Year of manufacture: 1984-1987
Country of manufacture: Japan
Case: Original soft case
Weight: 3.77kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fret Depth: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5″)
RADIUS: 184mm (7.25″)
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, fingerboard side burr correction, nut replacement, 5th string saddle screw and spring installation

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
E805223

Year of manufacture
1984-1987

Country of manufacture
Japan

Case
Genuine soft case

Weight
3.77kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
42.5mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
23.0mm

Scale
648mm (25.5″)

RADIUS
184mm (7.25″)

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, fingerboard side burr correction, nut replacement, 5th string saddle screw, spring installation