Description

Steve Lukather’s signature model.
Alder body with rosewood fingerboard and solidly-grained bird’s-eye maple neck.
The smooth body design is easy to fit, and this one-of-a-kind guitar is the result of research into high playability and body weight.
The H-S-S layout arrangement with a 5-way switch provides a variety of sounds.

* It is in good playing condition as it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, and mortised after our arrival.

There is a small ding with a paint crack at the bottom of the back plate on the back of the body.
Other than that, it is in good condition with only minor scratches and small dings.

Item rank: B+ (Good)

Year of manufacture: Made in 2005
Truss rod: There is enough room.
Fret: 60-70%.
Accessories Hard case / Genuine arm
Country of Origin USA
Weight 3.61kg
Serial G30869

Truss Rod: No problem.
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.0mm
Neck thickness(near 1st fret)|20.5mm
Neck thickness (near 12th fret)|23.3mm
SCALE|648mm (25.5″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Still can withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.0mm

Neck Thickness (near 1st fret)
20.5mm

Neck Thickness (near 12th fret)
23.3mm

Scale
648mm (25.5″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment