Description

The ZO-3 series, synonymous with mini-guitars with built-in amp, is a rare theremin-equipped THERMIN-ZO.
The grille part of the speaker ring is the antenna of the theremin, and the controls are the Vol knob with ON-OFF, the volume balance adjustment knob between the theremin and the guitar, and the theremin FREQ( Frequency) frequency band adjustment knob.

* The theremin part is not covered by warranty.
* The guitar has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted after our arrival, so it is in good playing condition.

There are some parts have some cuss marks, minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 2002
Truss rod: There is enough room.
Fret: 60-70%.
Accessories Soft case / Non-genuine
Country of Origin CNINA
Weight 2.87kg
Serial FG02080710

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.6mm
Neck thickness(near 1st fret)|20.0mm
Neck thickness (near 12th fret)|21.8mm
SCALE|610mm (24″)
RADIUS|356mm (14″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
41.6mm

Neck Thickness (near 1st fret)
20.0mm

Neck Thickness (near 12th fret)
21.8mm

Scale
610mm (24″)

RADIUS
356mm (14″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment