Description

Although Squier is now produced in Asian countries, this is a Japanese-made Squier from 1984-1987, when it was produced by Fujigen.
The body is made of basswood, the neck is maple, and the pickups are original Squier pickups.
It has a fat and dry mid-range tone that is typical of its age.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, electrical repair, mortise and tenon nut adjusted.
The neck has a large amount of threading and has been adjusted to a higher string height.

The arm and back panel are missing.
There are scratches, dents, and other signs of use due to age and use.

Item rank: B+ (Good)

Year of manufacture: 1984-1987
Truss rod: There is room to spare.
Fret: 60-70%.
Accessories Soft case / Non-genuine
Country of Origin Japan
Weight 3.84kg
Serial MIJ E778845

Truss rod: No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|23.2mm
SCALE|648mm (25.5″)
RADIUS|184mm (7.25″)
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon, nut adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: We have checked the rod up to 60 degrees to the left and right, and there is no problem.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.5mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
23.2mm

Scale
648mm (25.5″)

RADIUS
184mm (7.25″)

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon nut adjustment