Description

PB type of Schecter Model-T lineage is in stock.
The wood grain indicates that an ash body was probably used, and the weight is very heavy, which is typical of Schecter. The shape of the pickguard and the shape of the one-ply pickguard give it an OPB style feel.
The rear and front parts have completely different bass sounds, making this bass suitable for a wide range of genres.

There are some paint chips and small cracks on the back and sides of the body.
There are some scratches, dents, and metal tarnish, but there are no noticeable damages.
The neck is in good playing condition with no noticeable abnormalities.

Serial number: 48618
Case: Original soft case
Weight: 4.66kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right, no problem.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.1mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 23.2mm
SCALE: 864mm (34″)
RADIUS: 305mm (12″)
Strings in setup: Galli Strings / .012-.054 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

specs

Serial No.
48618

Case
Genuine soft case

Weight
4.66kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
40.1mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
23.2mm

Scale
864mm (34″)

RADIUS
305mm (12″)

Strings for setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing