Description

Chic and graceful Les Paul Custom with quilted maple top.
Constructed with a quilted maple top, mahogany body and neck, and rosewood fingerboard.
Satin-finished neck for high playability.
Equipped with GIBSON USA 490R and 498T pickups for high-gain sound.

Rear push-pull pot has been replaced with an ESP one due to damage.
The neck is slightly twisted, but there is no problem in playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 1302202457
Year of manufacture: 2013
Case: Original hard case
Weight: 3.92kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.5mm
SCALE: 628mm (24.75″)
RADIUS: 432mm (17″)
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (front volume pot replacement), strap pin x 2 looseness correction, toggle switch plate screw holes reworked, correction, screw replacement

Specs: Reworked and replaced screws.

Item Rank
B+: Some scratches, but no problem in normal use

12 months old

Serial No.
1302202457

Year of manufacture
2013

Case
Genuine hard case

Weight
3.92kg

Truss Rod
No problem, confirmed to 60 degrees left and right

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.5mm

Scale
628mm (24.75″)

RADIUS
432mm (17″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (front volume pot replacement), strap pins x 2 looseness correction, toggle switch plate screw holes reworked, correction, screw replacement