Description

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please call to speak to one of our experts.

Summary

Finish: Original

Body Material: Maple Body

Top Material: Maple Top

Body Details: Hollow body with mahogany bridge block and laminated maple back, sides, and top with outer veneer layers. The veneer has cracked in several areas of the top, and has been reglued in areas in which it was lifting. The cracks are cosmetic only, and are not affecting structural integrity.

Neck Material: Maple Neck

Neck Profile: “D” profile

Neck Thickness (IN): .76″ (1st fret), .80″ (12th fret)

Fingerboard Radius: 12.00″

Nut Width: 1-1/2″

Scale Length: 24 3/4″

Neck Details: Bolt-on maple neck with unbound rosewood fretboard, dot inlays, and heel-adjust truss rod.

Electronics: Original single coil pickups and electronics, with 3-way toggle switch and volume/tone controls for each pickup. Several solder joints have been touched up and the electronics have been thoroughly cleaned. The string ground wire has been spliced together.

Pickup Measurements: 6.8k (neck), 7.8k (bridge)

Hardware: Original

Weight: 5 lbs 15 oz

Cosmetic Condition: Several solder joints have been touched up, and the bridge ground wire has been spliced. Several veneer cracks have been glued.

Modifications/Repairs: Several solder joints have been touched up, and the bridge ground wire has been spliced. Several veneer cracks have been glued.

Tech Notes: The guitar plays well with low action and optimal neck relief, and is currently set up with 10s. The narrow frets are very low with light wear and divots present on the first few frets; the guitar has been set up to play cleanly and comfortably in this condition. The truss rod is adjustable. The serial number dates the guitar’s production run to 1966-67.

Case Details: Original chipboard case.