Description

This is the LPS-Q, a top-of-the-line Les Paul Standard by Orville by Gibson, made in 1992.
This model has a laminated quilted maple top.
It has a maple top/mahogany back body like the original.
The neck is mahogany and the fingerboard is rosewood.
The quality of this model is as good as the original Gibson model, which can only be achieved by Orville.
Front pickups are replaced and unknown. Rear pickups are Gibson USA stamped pickups.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and frets adjusted, so it is in good playing condition.

There is a large ding on the body and neck joint where the wood is gouged out.
There are many dents on the back of the body with paint cracks and dents.
Other parts have some scuffs, and there are some minor scratches and dents overall.

Item rank: B+ (Good)

Year of manufacture: 1992
Truss rod: There is enough room.
Fret: 60-70%.
Accessories: Hard case / Non-genuine lock pin
Country of Origin Japan
Weight 4.30kg
Serial G207027

Truss Rod : No problem.
Fretboard: Still good for cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.8mm
Neck thickness(near 1st fret)|21.3mm
Neck thickness (near 12th fret)|23.6mm
SCALE|628mm (24.75″)
RADIUS|305mm (12″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Note that the frets are low and can still withstand cutting.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.8mm

Neck Thickness (near 1st fret)
21.3mm

Neck Thickness (near 12th fret)
23.6mm

Scale
628mm (24.75″)

RADIUS
305mm (12″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment