Description

This is a 1989 Vintage Reissue ’57 Stratocaster from Fender’s Vintage Reissue series.
In the early 1980s, Fender reproduced the 1957 Stratocaster as one of the first vintage reissue models.
It has a soft V-shaped 1-piece maple neck, alder body, and Crosswire US pickups, which are among the most popular Stratocaster specs in its long history.
The Fiesta Red color has probably faded with age and turned almost orange.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and fretted, so it is in good playing condition.

There is a missing back panel and a crack on the pickguard near the TONE area.
There are some minor scratches and small dents with paint cracks.

Item rank: B+ (Good)

Year of manufacture: 1989
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories Hard case / Genuine tremolo arm
Country of Origin USA
Weight 3.68kg
Serial V046177

Truss Rod : No problem, rod is confirmed to be 60 degrees to the left and right.
Fretboard: Still can withstand cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.0mm
Neck thickness (near 12th fret)|22.5mm
SCALE|648mm (25.5″)
RADIUS|184mm (7.25″)
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Still can withstand cutting, but the frets are low.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.0mm

Neck Thickness (near 1st fret)
21.0mm

Neck Thickness (near 12th fret)
22.5mm

Scale
648mm (25.5″)

RADIUS
184mm (7.25″)

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment